|  | Adaptive Channel Allocation in TACS 
M Almgren, M Frodigh, 
B Hansson,
 
J Lundequist, K Wallstedt
 
Ericsson Radio Systems AB, SE-164 80 Stockholm, Sweden
  
GLOBECOM '95,  IEEE Global Telecommunications 
Conference. New York. pp.1517-21 vol.2.
© 1995 IEEE.
 
 
  
Abstract:
The paper describes an adaptive channel 
allocation, ACA, algorithm designed 
for an analog cellular system like TACS. The incentive to use 
more advanced radio resource allocation algorithms can be to 
eliminate frequency planning, to increase the capacity and 
improve the quality of the system. 
Specific to TACS is that 
measurements only are available in the uplink. Based on these 
limited measurements the radio resource allocation algorithm 
has to make decisions which affects both the uplink and the 
downlink. 
 
The ACA algorithm is divided into two parts, a 
slow ACA and a fast ACA part. The slow ACA part finds a 
set of channels for each base station based on measurements 
taken over a long time period, i.e, manual frequency planning 
is eliminated or at least reduced. The fast ACA part makes the 
actual channel assignment to the arriving calls using the set of 
channels provided by the slow ACA part. 
 
The performance of 
the slow and fast ACA are estimated by system simulations. 
The results indicate that the fast ACA increases the quality 
in the system which can be used to reduce the cluster size 
from 21 to 12 and thereby increase the capacity. 
The simulations also indicate that the slow ACA finds a reasonably 
good frequency plan. Some capacity is lost due to the fact that only 
uplink measurements are available.
Related publications:
Master Thesis by Jan Lundeqvist and
Björn Hansson.
Master Thesis on adaptive SAT
allocation for TACS
 Personal use of this material is permitted.
However, permission to reprint/republish this material for
advertising or promotional purposes or for creating new
collective works for resale or redistribution to servers or lists,
or to reuse any copyrighted component of this work in other works
must be obtained from the IEEE.
 |